Installation Guide

Read this guide fully before cutting any film. Always follow the printed guide supplied in your kit.

1. Measure

Measure the visible glass area of each window you want to cover (width and height). Plan a cutting layout on paper before touching the film.

2. Clean

Clean the inside of the glass thoroughly with a lint-free cloth. Any dust or grease under the film will show.

3. Cut

Cut the film to size on a flat, clean surface with a straight edge and a sharp blade. Only cut in the areas permitted by the supplied guide — do not cut through the conductive edge strips.

4. Position

Peel the backing, lightly mist the glass and position the film on the inside of the window.

5. Smooth

Work from the center outward with the included squeegee to push out water and air bubbles. Let it cure before switching.

6. Connect & test

Connect the film to the included power adapter following the supplied wiring guide, then test with the remote. Electrical connections should be completed by a qualified installer.

Check your state's window-tint regulations before applying film to the windshield or front side windows.